D-Link DES-3326 User Manual page 339

24-port NWay Ethernet Switch User's Guide
Route Cost
State
PIM-DM Setup
The following figure and table describe the configuration of a
Protocol Independent Multicast - Dense Mode (PIMDM)
interface on the switch.
Figure 7-43. PIMDM Interface Configuration Screen
Web-Based Network Management
The default value is 35 seconds.
Allows the assignment of a DVMRP route
cost to the above IP interface. A DVMRP
route cost is a relative number that
represents the real cost of using this
route in the construction of a multicast
delivery tree. It is similar to, but not
defined as, the hop count in RIP. The
default value is 1.
Allows DVMRP to be Disabled or Enabled
for the above IP interface. The default is
Disabled.
323