24-port NWay Ethernet Switch User's Guide
Figure 6-57. Setup MAC Address Filter
The Action:<
> field can be toggled between Add/Modify and
Delete using the space bar. Enter the VLAN ID in the VID:[
]
field and the MAC address to be filtered in the MAC
] field.
Address:[
The Source/Destination: <
> field can be toggled between
Src. (source), Dst. (destination), and Either. The MAC address
entered into the filtering table can be filtered as a source
(packets will not be received from the MAC address), as a
destination (packets will not be transmitted to the MAC address),
or as either a source or destination (packets will not be received
from or transmitted to the MAC address.
Highlight APPLY and press enter to make the changes current.
Use Save Changes from the Main Menu to enter the changes
into NV-RAM.
To enter an IP address into the filtering table:
Highlight IP Address Filter from the Filtering Menu and press
enter.
208
Configuring the Switch Using the Console Interface