D-Link DES-3326 User Manual page 354
24-port fast ethernet plus 2-port gigabit module layer 3 switch
Hide thumbs
Also See for DES-3326:
- User manual (285 pages) ,
- Configuration manual (9 pages) ,
- User manual (404 pages)
Table of Contents
Advertisement
When the switch receives packets destined for a BOOTP or
DHCP server, it forwards them to specific servers as defined in
the following configuration. The switch also forwards packets
from the BOOTP or DHCP servers to the appropriate subnets.
The first task is to set some parameters for the relay agent to
decide whether or not to forward a given BOOTP/DCHP packet.
Figure 7-54. BOOTP/DHCP Relay Screen
Parameter
BOOTP/DHCP Relay Status
BOOTP HOPS Count Limit
338
24-port NWay Ethernet Switch User's Guide
Description
Allows the BootP/DHCP
relay function to be
Enabled or Disabled.
Allows the maximum
number of hops (routers)
that the BootP messages
can be relayed through to
be set. If a packet' s hop
count is more than the hop
count limit, the packet is
dropped. The range is
between 1 and 16 hops.
The default value is 4.
Web-Based Network Management
Advertisement
Table of Contents
Troubleshooting
