24-port NWay Ethernet Switch User's Guide
Enabled, enter the IP address of the Primary name server and a
secondary server, if so desired.
The DNS Relay Cache Status:<Disabled> can be toggled
between Disabled and Enabled.
This determines if a DNS
cache will be enabled on the switch.
The DNS Relay Static Table Lookup Status:<Disabled> can
be toggled between Disabled and Enabled. This determines if
the static DNS table (entered under Static Table Setting, below)
will be used or not.
To make a static DNS table entry:
Highlight Static Table Setting on the DNS Relay menu and press
Enter.
Figure 6-78. DNS Relay Setup – Layer 3
The Action:<Add/Edit> field can be toggled between Add/Edit
and Delete. Enter the Domain name and its corresponding IP
232
Configuring the Switch Using the Console Interface