D-Link DES-3326 User Manual page 298
24-port fast ethernet plus 2-port gigabit module layer 3 switch
Hide thumbs
Also See for DES-3326:
- User manual (285 pages) ,
- Configuration manual (9 pages) ,
- User manual (404 pages)
Table of Contents
Advertisement
Auto-Logout
Slip Settings
Parameter
Baud Rate
Interface Name
Local IP Address
Remote IP Address The IP address of the remote
MTU
Switch
The switch can operate in one of two modes:
282
24-port NWay Ethernet Switch User's Guide
Specifies length of time a management
session can be idle. When this time has
expired, the switch' s management agent
will disconnect the user. The default
value is 10 minutes.
Description
Specifies the rate data will be exchanged
over the serial link. The default value is
9600 baud.
The name of the IP interface, previously
defined on the switch, that will
communicate with the remote
management station.
The IP address that corresponds to the IP
interface name above.
management station that will
communicate with the switch using SLIP.
Maximum Transfer Unit, specifies the
maximum number of bytes (octets) that
can be transferred in a single packet. The
options are 1006 and 1500.
Web-Based Network Management
Advertisement
Table of Contents
Troubleshooting
