24-port NWay Ethernet Switch User's Guide
To Enable or Disable IGMP Snooping for a VLAN, highlight
IGMP Snooping Settings, and press enter.
Figure 6-38. IGMP Snooping Settings
To edit a VLAN' s IGMP Snooping Settings:
Enter the VID of the VLAN for which the IGMP settings are to
be edited.
The State:<
> field can be toggled between Enabled and
Disabled using the space bar. This enables or disables IGMP
snooping for the selected VLAN.
The Age-out Timer:[
] field allows the entry of an IGMP age-
out timer value between 10 and 9,999 seconds.
This timer
determines how long a snooped multicast member' s IP and MAC
address remain in the IGMP address table. The default value is
260 seconds.
To globally enable or disable IGMP for the switch:
Configuring the Switch Using the Console Interface
181