D-Link DES-3326 User Manual page 225

24-port NWay Ethernet Switch User's Guide
Figure 6-58. IP Address Filtering Setup
The Action:< > field can be toggled between Add/Modify and
Delete using the space bar. Enter the IP address to be filtered
in the IP Address:[ ] field.
The Source/Destination: < > field can be toggled between
Src. (source), Dst. (destination), and Either. The IP address
entered into the filtering table can be filtered as a source
(packets will not be received from the IP address), as a
destination (packets will not be transmitted to the IP address),
or as either a source or destination (packets will not be received
from or transmitted to the IP address.
Highlight APPLY and press enter to make the changes current.
Use Save Changes from the Main Menu to enter the changes
into NV-RAM.
Configuring the Switch Using the Console Interface
209