D-Link DES-3326 User Manual page 165

24-port NWay Ethernet Switch User's Guide
Figure 6-16. Setup Trap Recipients Menu
The IP Address field is the IP address of a management station
(usually a computer) that is configured to receive the SNMP
traps from the switch.
The SNMP Community String is similar to a password in that
stations that do not know the correct string cannot receive or
request SNMP information from the switch.
The Status field can be toggled between Enabled and Disabled
to enable or disable the receipt of SNMP traps by the listed
management stations.
Note: Up to four SNMP trap recipients can be entered.
Configuring the Switch Using the Console Interface
149