D-Link DES-3326 User Manual page 304

RIP
DVMRP
DVMRP Incld. Report.
PIMDM
Setup IP Interface
The first menu displays the current IP interfaces on the switch.
The Add and Edit menus are used to add a new IP interface, and
to edit an existing IP interface, respectively.
Each IP interface on the switch corresponds to a VLAN. The
VLAN must be configured before the IP interface can be setup.
The IP interface must have the same name (and the same VID
number) as its corresponding VLAN.
Note: A VLAN that does not have a corresponding IP interface
defined for it, will function as a Layer 2 Only VLAN –
regardless of the Switch Operation mode.
288
24-port NWay Ethernet Switch User's Guide
Allows RIP to be Enabled or
Disabled. This enables or disables,
globally, the Routing Information
Protocol (RIP).
This enables or disables, globally,
the Distance-Vector
Routing Protocol (DVMRP).
(This version of DVMRP allows
reports from Unknown neighbor
routers). This enables or disables,
globally, the
Multicast Routing
(DVMRP).
This enables or disables, globally,
the Protocol
Multicasting – Dense Mode (PIM-
DM) multicasting protocol.
Web-Based Network Management
Multicast
Distance-Vector
Protocol
Independent