24-port NWay Ethernet Switch User's Guide
SNMP v1 or to be able to access the Switch using the TELNET
protocol or the WEB-based Manager. Please see the next chapter
for Web-based network management information.
The Remote Management Setup menu lets you specify how the
switch will be assigned an IP address to allow the switch to be
identified on the network.
To setup the switch for remote management:
Highlight Remote Management Setup from the main menu.
The following screen appears:
Figure 6-15. Switch Information Menu
Configuring the Switch's IP Address
The Switch needs to have an IP address assigned to it so that an
In-Band
network
management
system
(eg.
WEB-based
Manager or TELNET) client can find it on the network. The
Remote Management Setup screen allows you to change the
146
Configuring the Switch Using the Console Interface