To setup a static router port:
Highlight Setup Static Router Port from the Multicasting Menu
and press enter.
Note: All IGMP Report packets will be forwarded to the
router port.
Note:
flooded to all ports.
Note: All UDP multicast packets will be forwarded to the
router port. Because routers do not send IGMP reports or
implement IGMP snooping, a multi-port router connected
to the router port of the Layer 3 switch would not be able
to receive UDP data streams at all of its ports unless the
UDP multicast packets were all forwarded to the router
port.
Configuring the Switch Using the Console Interface
24-port NWay Ethernet Switch User's Guide
Figure 6-49. Static Router Port Setup
IGMP queries (from the router port) will be
199