24-port NWay Ethernet Switch User's Guide
BOOTP/DHCP Relay Time Thresh. Sets the minimum time (in
Static Bootp Relay Setup
The second task is to tell the BOOTP/DCHP relay agent where
the servers are located in terms of IP addresses and subnet
names (IP interface names).
The following figure and table describe how to set up the static
Bootp Relay function on the switch.
Web-Based Network Management
seconds) that the switch
will wait before forwarding
a BOOTREQUEST packet.
If the value in the seconds
field of the packet is less
than the relay time
threshold, the packet will
be dropped. The range is
between 1 and 9999
seconds. The default value
is 4 seconds.
339