D-Link DES-3326 User Manual page 310
24-port fast ethernet plus 2-port gigabit module layer 3 switch
Hide thumbs
Also See for DES-3326:
- User manual (285 pages) ,
- Configuration manual (9 pages) ,
- User manual (404 pages)
Table of Contents
Advertisement
Rx Mode
Auth.
Port Configuration
The following figure and table describe the configuration of ports
on the switch. You can select a port to be configured by clicking
on the port in Area 1 (the switch icon at the top of the web-based
manager' s user interface). This port then becomes the currently
selected port and all entries in the following figure will apply to
this port.
294
24-port NWay Ethernet Switch User's Guide
V2 Only, or Disabled. This entry
specifies which version of the RIP protocol
will be used to transmit RIP packets.
Disabled prevents the transmission of RIP
packets.
Determines how received RIP packets will
be interpreted – as RIP version V1 only,
V2 Only, V1 and V2, or Diabled. This
entry specifies which version of the RIP
protocol will be used to receive RIP
packets. The Disabled entry prevents the
reception of RIP packets.
Allows RIP to be configured to use an
authorization string.
Web-Based Network Management
Advertisement
Table of Contents
Troubleshooting
