D-Link DES-3326 User Manual page 174

24-port NWay Ethernet Switch User's Guide
filtering/forwarding decisions. A very short aging time
may cause entries to be aged out to soon, resulting in a
high percentage of received packets whose source
addresses cannot be found in the address table, in which
case the switch will broadcast the packet to all ports,
negating many of the benefits of having a switch.
Spanning Tree Protocol:<Enabled> This field can be toggled
between Enabled and Disabled using the space bar.
enables or disables the STP globally for the switch. STP can also
be setup by user-defined groups of ports, with user-defined
parameters for each port (see Advanced Setup – Spanning
Tree for group and port STP setup).
Switch GVRP: <Enabled>As of firmware release 1.00-B19,
GVRP is supported on the DES-3326.
planned for a later firmware release. As such this field cannot
be changed. Group VLAN Registration Protocol is a protocol that
allows members to dynamically join VLANs.
Switch GMRP: <Enabled> As of firmware release 1.00-B19,
GMRP is supported on the DES-3326.
planned for a later firmware release. As such, this field cannot
be changed. Group Multicast Registration Protocol is a protocol
that allows members to dynamically join Multicast groups.
Broadcast/Multicast Storm Control:
series of entry fields for the parameters that control how the
switch will react to Broadcast and Multicast storms:
Upper Threshold for Base Ports: [128]Kpps This is
the number of thousands Broadcast/Multicast packets
per second received by the switch – on one of the base
ports – that will trigger the switch' s reaction to a
Broadcast/Multicast storm.
158 Configuring the Switch Using the Console Interface
Support for GVRP is
Support for GVRP is
The following are a
This