D-Link DES-3326 User Manual page 189

The ports are further set to be either a Tagged or an Untagged
port.
To edit the 802.1Q VLAN membership of a port:
Highlight the first field of Membership (E/F/-): [ ][ ][ ]. Each
port' s 802.1Q VLAN membership can be set individually by
highlighting the port' s entry using the arrow keys, and then
toggling between E, F, or – using the space bar.
E - (Egress Member) specifies the port as being a static
member of the VLAN. Egress Member Ports are ports
that will be transmitting traffic for the VLAN. These
ports can be either tagged or untagged.
F - (Forbidden Non-Member) specifies the port as not
being a member of the VLAN and that the port is
forbidden from becoming a member of the VLAN
dynamically.
- (Non-Member) specifies the port as not being a member
of the VLAN, but the port can become a member of the
VLAN dynamically.
To edit a port' s Tagged or Untagged status:
Highlight the first field of Tagging (U/T):[ ][ ][ ] field. Each
port' s state can be set by highlighting the port' s entry using the
arrow keys and then toggling between U or T using the space bar.
U - specifies the port as an Untagged member of the
VLAN. When an untagged packet is transmitted by the
port, the packet header remains unchanged.
tagged packet exits the port, the tag is stripped and the
packet is changed to an untagged packet.
Configuring the Switch Using the Console Interface
24-port NWay Ethernet Switch User's Guide
When a
173