D-Link DES-3326 User Manual page 272

Figure 7-3. User Accounts Control Table - Edit
1. Enter the new user name, assign an initial password, and
then confirm the new password. Determine whether the
new user should have Root, User+, or User privileges.
2. Click on APPLY to make the user addition effective.
3. A listing of all user accounts and access levels is shown
on the user accounts control table. This list is updated
when Apply is executed.
4. Please remember that Apply makes changes to the switch
configuration for the current session only. All changes
(including User additions or updates) must be entered
into non-volatile ram using the Save Changes command
on the Main Menu - if you want these changes to be
permanent.
Root, User+ and Normal User Privileges
There are three levels of user privileges: Root and User+, and
User. Some menu selections available to users with Root
privileges may not be available to those with User+ and User
privileges.
256
24-port NWay Ethernet Switch User's Guide
Web-Based Network Management