D-Link DES-3326 User Manual page 182

24-port NWay Ethernet Switch User's Guide
To create an 802.1Q VLAN, toggle the Action: <Add/Modify>
field to Add/Modify using the space bar.
number in the VID#[
the VLAN Name:[
Choose which ports will be members of the new VLAN and enter
their membership status in the Membership (E/F/-): [ ][
field. The status indicators of the individual ports can be
entered directly from the keyboard or toggled using the space
bar. Moving between the status indicators of the individual ports
is accomplished using the arrow keys.
To set the 802.1Q VLAN membership status of a port:
To enter the 802.1Q VLAN status for a port, highlight the first
field of Membership (E/F/-): [ ][ ][ ]. Each port' s 802.1Q VLAN
membership can be set individually by highlighting the port' s
entry using the arrow keys, and then toggling between E, F, or –
using the space bar.
E - (Egress Member) specifies the port as being a static
member of the VLAN. Egress Member Ports are ports
that will be transmitting traffic for the VLAN.
ports can be either tagged or untagged.
F - (Forbidden Non-Member) specifies the port as not
being a member of the VLAN and that the port is
forbidden from becoming a member of the VLAN
dynamically.
- (Non-Member) specifies the port as not being a member
of the VLAN, but the port can become a member of the
VLAN dynamically.
Next, determine which of the ports that are members of the new
VLAN will be Tagged or Untagged ports.
166
] field and a name for the new VLAN in
] field.
Configuring the Switch Using the Console Interface
Enter a VLAN ID
][ ]
These