24-port NWay Ethernet Switch User's Guide
Figure 6-95. System Reboot Menu
The reboot options are as follows:
Reboot simply restarts the switch. Any configuration settings
not saved using Save Changes from the Main Menu will be lost.
The
switch' s
configuration
will
be
restored to the last
configuration saved in NV-RAM.
Save Configuration & Reboot saves the configuration to NV-
RAM (identical to using Save Changes) and then restarts the
switch.
Reboot & Load Factory Default Configuration restarts the
switch using the default factory configuration. All configuration
data will be lost. This is identical to using Factory Reset and
then Reboot.
Reboot & Load Factory Default Configuration Except IP
restarts
the
switch
using
the
default
factory
Address
248
Configuring the Switch Using the Console Interface