Download Print this page

Maintenance; Moving The Instrument - Roland HP 38006 Owner's Manual

Advertisement

IMPORTANT
NOTES
In addition to the items listed under Safety Precautions
inside the front cover, please read and observe the fol-
lowing:
Power Supply
* Before connecting this unit to other devices, tum off the
power to all units; this will help prevent damage or mal-
function.
* Do not use this unit on the same power circuit with any
device that will generate line noise; an electric motor or
variable lighting system for example.
Placement
* Using the unit near power amplifiers (or other equip-
ment containing large power transformers) may induce
hum.
This device may interfere with radio and television
reception. Do not use this device in the vicinity of such
receivers.
Observe the following when using the unit's disk drive.
Kor further details, refer to "Before Using Disks".
« Do not place the unit near devices that produce a
strong magnetic field (eg., loudspeakers).
¢ Install the unit on a solid, level surface.
* Do not move the unit or subject it to vibration while
the drive is operating.
Make sure you always have the instrument placed so it
is level and sure to remain stable. Otherwise, if played
while tilted, you risk causing damage to the keyboard as
a result of the unnatural degree of force that might be
applied to certain parts of it.
Maintenance
* For everyday cleaning wipe the unit with a soft, dry
cloth or one that has been slightly dampened with
water. To remove stubborn dirt, use a mild. non-abra-
sive detergent. Afterwards, be sure to wipe the unit
thoroughly with a soft, dry cloth.
Never use benzene, thinners, alcohol or solvents of any
kind, to avoid the possibility of discoloration and/or
deformation.
Additional Precautions
* Protect the unit from strong impact.
.
Do not allow objects or liquids of any kind to penetrate
the unit. In the event of such an occurrence, discontinue
use immediately. Contact qualified service personnel as
soon as possible.
Never strike or apply strong pressure to the display.
+ Asinall amount of heat will radiate from the unit during
normal operation.
¢ Before using the unit in a foreign country, consult with
qualified service personnel.
Handling the drive
¢ Avoid using the unit in areas of high humidity (eg., con-
densation). High levels of humidity can adversely affect
the operation of the drive and/or damage floppy disks.
When the unit has been transported, allow it to warm to
room lemperature before operating.
To insert a disk, push it gently but firmly into the drive
— it will click into place. To remove a disk, press the
EJECT button firmly. Do not use excessive force to
remove a disk which is lodged in the drive.
Never attempt to remove a floppy disk from the drive
while the drive is operating (the indicator is lit); damage
could result to both the disk and the drive.
Remove any disk from the drive before powering up or
down.
Moving the Instrument
When attached to the keyboard stand, the instrument is
top-heavy. Two people should be on hand to move it.
When moving the instrument, take care to protect your-
self from injury and the instrument from damage.

Advertisement

loading

This manual is also suitable for:

Hp 28006Hp 3800gHp 2800g