Printing Hard-To-Dry Media; Preventing Media From Coming Loose - Roland Soljet Pro III XJ-740 User Manual

Printing Hard-to-dry Media

Procedure
–
—
˜
™
Description
You use this when ink dries poorly even when the print heater and dryer are used. Larger values produce progressively
slower movement of the media, enabling you to extend the drying time accordingly. Printing time takes correspond-
ingly longer.
You can also make this setting on the computer. When you have made the setting on the computer, the computer's
setting is used and the printer's setting is ignored.
Default Setting
[SCAN INTERVAL]: OFF

Preventing Media from Coming Loose

Procedure
–
—
˜
™
Description
The platen uses suction to grip the media and keep it stable. When media comes loose from the platen because it is
warped or wrinkled, increasing the suction force may help correct the problem. Conversely, when the media is flimsy
and cannot move smoothly, reducing the suction force may help.
When set to "AUTO," the suction force is automatically adjusted to the optimal level for the media width.
Press .
Press several times.
Press .
Press several times.
Press .
Use to set the value.
Press .
Press .
Press to go back to the original screen.
Press .
Press several times.
Press .
Press several times.
Press .
Use to set the value.
Press to enable the setting.
Press .
Press to go back to the original screen.
5-3 Accommodating Various Kinds of Media
Chapter 5 Feature Reference 73