4-6 When Moving the Unit
2.
Secure the print heads in place.
Remove the drain bottle and detach the drain-bottle stand. Then attach the drain-tube cover.
Flip the loading lever to the rear.
Secure the print heads in place using the packing material.
Detach the roll media from the media holders.
Detach the media holders and the shafts.
If necessary, also detach the dancer roller, rail slider, and stand legs etc.
The machine is now ready to be moved.
3.
Immediately move the machine and fill it with ink.
Once the preparations are complete, move the machine with as little delay as possible.
Immediately reinstall the machine and fill with ink.
To reinstall and fill with ink, refer to the Setup Guide. When filling with ink, you use the cleaning cartridges
again.
66
Chapter 4 Maintenance and Adjustment