Table of Contents
Advertisement
1-2 Part Names and Functions
Pinch rollers
These clamp the media when
the loading lever is pulled back
toward you.
Knife guide
The separating knife passes
through this when you perform
media cutoff.
Grit rollers
These rollers feed out media
toward the front of the ma-
chine.
22
Chapter 1 Introduction
Guide line
This line serves as a guide for
positioning the right edge of
the media.
Print-head carriage
The print heads are inside this.
Media clamps
These keep the media from
coming loose and prevent fuzz
on the cut edge of the media
from touching the print heads.
Platen
This is the path over which the
media passes. A suction fan
that keeps the media from
coming loose and a preheater
and print heater that help fix
the ink are built in.
Advertisement
Table of Contents
