Setting How The Printer Operates; Determining What Happens When An Ink Cartridge Is Empty; Changing The Type Of Ink - Roland Soljet Pro III XJ-740 User Manual

5-4 Setting How the Printer Operates

Determining What Happens When an Ink Cartridge Is Empty

Procedure
–
—
˜
™
Description
This lets you change, according to your purpose, the operation that takes place when an ink cartridge is empty.
"STOP" immediately pauses operation when a cartridge becomes empty. Because pausing printing in progress may
make colors uneven, it is best to ensure a sufficient amount of remaining ink before you begin printing.
"CONT." (continue) is a mode in which operation is not automatically stopped. When a cartridge becomes empty, a
warning beep sounds but printing doesn't stop. To replace the cartridge, you must either wait until printing ends or
press to pause printing. Note that operation does not stop even if ink runs out completely.
Default Setting
[EMPTY MODE]: STOP

Changing the Type of Ink

Procedure
–
—
˜
™
Description
You use this when changing the type of ink. Selecting the type of ink used for replacement starts head-cleaning and
ink-filling operations. Follow the on-screen instructions to insert and remove cartridges.
This operation requires four unused SOL INK cleaning cartridges.
Press .
Press several times.
Press .
Press twice.
Press twice.
Use to make the setting.
Press to enable the setting.
Press .
Press to go back to the original screen.
Press .
Press several times.
Press .
Press twice.
Press .
Press .
Press .
Use to make the setting.
Press to execute the setting.
Chapter 5 Feature Reference 77