5-3 Accommodating Various Kinds of Media
How to Load Sheet Media
As with standard-size media, make sure of the following points when loading sheet media.
Procedure
If roll media is loaded, remove the media first.
Media
Attach the media clamps and close the front cover.
P. 32, "Loading Media," step
76
Chapter 5 Feature Reference
Align here
Loading lever
3
Pass the sheet media through the machine.
Align the front edge of the media with the loca-
tion shown in the figure.
Pull back the loading lever.
The media is secured in place.
Use
to select "ROLL."
Press
.
starts to flash. When initialization ends,
remains steadily lighted, and the printable
width is displayed.