Table of Contents
Advertisement
1-2 Part Names and Functions
Printer Unit
Maintenance cover
You remove this when you per-
form cleaning of the print heads.
Main power switch
Power-cord connector
This supplies power to the
printer.
Cartridge slots
There are where ink cartridges
are installed.
Ink-cartridge tray
Drain bottle
This collects drained ink and
other such fluids.
Front cover
Be sure to close this when
you perform printing.
Dryer
This heats the media to hasten
ink-drying.
Media holders
Here is where you load roll
media and secure it in place.
Loading lever
You operate this when
you load media.
Operation panel
You use this to perform
various operations.
P. 23, "Operation Panel"
Link LED
This lights up green when the con-
nection to the network is correct.
Status LED
This flashes yellow while data is
being received from the network.
Ethernet connector
This is used to connect the
printer to a network.
Chapter 1 Introduction
21
Advertisement
Table of Contents
