2.
Replace the wipers. Use the included tweezers.
Felt surface toward
the back
Hook
3.
Quit the [REPLACE WIPER] menu item.
Perform a printing test to verify the results of the procedure.
P. 37, "Printing Tests and Cleaning"
Detach the old wipers.
Detach the hook and pull up and out.
Insert the new wipers.
Rubber surface toward
the front
Attach the hook.
Close the front cover.
Press
.
After the process to quit the [REPLACE WIPER] menu item ends, the screen
shown in the figure appears.
Press
.
Press
to go back to the original screen.
4-4 Replacing Consumable Parts
Chapter 4 Maintenance and Adjustment
61