Drying The Trailing Edge Of The Printing Area On The Dryer - Roland Soljet Pro III XJ-740 User Manual

5-6 Changing the Ink-drying Method

Drying the Trailing Edge of the Printing Area on the Dryer

Procedure
–
—
˜
Description
When this menu item is set to "ENABLE," additional media feed is performed until the trailing edge of the printing area
is positioned directly on the dryer. The margin between the print-end position and the next print-start position is fixed
at 200 mm. Any margin setting made on the computer is ignored.
When this is set to "DISABLE," media feed stops simultaneously when printing ends. This means that the trailing edge
of the printing area is not fed to the dryer unless you continue with a subsequent printing operation.
When you're using the take-up unit, be sure to set this to "DISABLE."
P. 44, "Operating Conditions for the Take-up System"
Default Setting
[FEED FOR DRY]: DISABLE
88 Chapter 5 Feature Reference
Hold down and press
Press .
Use to select "ENABLE."
Press to enable the setting.
Press .
Press to go back to the original screen.
.