Table of Contents
Advertisement
3-2 Using the Take-up System
To Take up Media Manually
You can take up media by using the MANUAL switch. However, never operate the MANUAL switch while the loading
lever is pulled back. Doing so may cause the media to be pulled with excessive force, actuating the protective feature
and resulting in an error.
Removing Taken-up Media
CAUTION
–
Cut off the media.
P. 33, "How to Cut Off Media"
—
Support the paper tube to prevent it from falling.
˜
Loosen the arm retaining screw and move the arm.
™
Detach the paper tube from the end caps.
Arm retaining screw
48
Chapter 3 Operation of the Media Take-up System
Removal of taken-up roll media from the unit is a task which must be carried out
by two or more persons.
If dropped, such items may cause injury.
˜
Take-up with inward
curl
Take-up with outward
curl
™
—
Advertisement
Table of Contents
