7-2 Printing Area
Printing Area and Margins
Media clamp
A
B
Left margin
(*1)
A: Setting of the [SIDE MARGIN] menu item (10 mm or 5 mm; 10 mm by default)
B: Width clamped by the media clamp (approx. 5 mm)
*1 The amount of the left and right margins is the total of A and B. If the following cases, however, the setting for A
becomes the amount of margin without change.
➢ When media has been loaded without installing the media clamps and
➢ When the [SHEET TYPE] menu item is set to [CLEAR] (regardless of whether the media clamps are present)
*2 The amount of margin can be changed by using
*3 Margin length required by the media take-up and feed systems is approximately 1,100 mm (43 in.).
90 mm (3.5 in.)
Printing area
75 mm (3 in.) (*3)
.
Media
Media clamp
A
B
Right margin
(*1) (*2)
has been pressed
Chapter 7 Specifications
119