2-2 Loading and Cutting Off Media
3.
Attach the media clamps and close the front cover.
Attach the media clamps.
The media clamps are magnetic, and the left and right clamps are distinct. Refer to the figure and install them at
the correct positions, taking care not to let the left and right clamps get mixed up.
Left media clamp
Align the edge of the
media with the centers
of the holes.
How to install correctly
Remove when not using roll media.
If roll media is allowed to stand unused in a loaded state for an extended period, the media may sag. This can cause
poor printing quality and motor errors, so be sure to remove and store such media when not in use.
32
Chapter 2 Operation
Close the front cover.
Use
to select "ROLL."
Press
.
starts to flash. When initialization ends,
remains steadily lighted, and the printable
width is displayed.
Right media clamp
Align the edge of the
media with the centers
of the holes.