3-2 Using the Take-up System
Fasten the media in place with tape at three locations (the center and both edges) so that the
media is not at an angle.
Take-up with outward curl
Fasten first.
Take-up with inward curl
Fasten first.
3.
Make the setting for the direction of automatic take-up and perform take-up of
the media onto the paper tube.
46
Chapter 3 Operation of the Media Take-up System
Adhesive tape
Paper tube
(3 places)
Adhesive tape
Paper tube
(3 places)
Dancer roller
Press
.
The media is pulled out and the screen shown in the
figure appears.
Pull the dancer roller back toward you.