Table of Contents
Advertisement
Operation Panel
Display screen
This displays various set-
ting menus and other in-
formation.
TEST PRINT key
Holding this down for one
second or longer performs
a printing test.
CLEANING key
You use this to perform
cleaning of the print
heads.
MENU key
You press this to enter the
menus for various settings.
Cursor keys
You use these to select set-
tings for menu items, to
move the media, and for
other such operations.
ENTER key
You use this for such tasks
as enabling setting values.
Panel Notation
In this document, the keys on the operation panel are indicated by the following images.
MENU key
SETUP key
ENTER key
PAUSE key
CLEANING key
TEST PRINT key
BASE POINT key
HEATER CONFIG key
SHEET CUT key
Cursor keys
1-2 Part Names and Functions
BUSY light
This lights up during printing
and other such operations.
BASE POINT key
You use this when you want to
set the print-start location. This
lights up when the setting has
been made.
SETUP key
You press this when you load
media. This lights up when
media is loaded and the ma-
chine is ready to perform print-
ing.
PAUSE key
This pauses printing.
SHEET CUT key
Holding this down for one sec-
ond or longer cuts off media.
Sub power switch
This switches the printer on
and off. (To switch the printer
off, you hold down the switch
for one second or longer.) This
flashes slowly when the ma-
chine is in the sleep mode.
HEATER CONFIG key
You press this to make the tem-
perature setting for the media
heating system. This flashes
during warm-up, then remains
steadily lighted when the pre-
set temperature is reached.
Chapter 1 Introduction
23
Advertisement
Table of Contents
