Table of Contents
Advertisement
5-3 Accommodating Various Kinds of Media
˜
™
š
Description
The media width can be sensed automatically for opaque media, but not for transparent media.
This means that the width and mounted location of the media must be set manually. Incorrect settings may cause ink
to be applied at locations where no media is present.
Note that to keep the heads from drying out, the [SHEET POS.] menu item ends automatically after a certain interval,
even if you're still making settings there.
The settings for the media width and start position made here are effective only when [SHEET TYPE] is set to "CLEAR."
Selecting "OPAQUE" disables the settings, although the setting values are saved in memory. Choosing "CLEAR" again
enables the values set previously.
Default Setting
[SHEET TYPE]: OPAQUE
[SHEET WIDTH]: 1879 mm (XJ-740) , 1625 mm (XJ-640), 1371 mm (XJ-540)
72
Chapter 5 Feature Reference
Use
Align this surface with the edge of the media.
After positioning, close the front cover.
Press
Press
Press
press
The top menu appears.
To quit making settings at the [SHEET POS.] menu item, use
then close the front cover and press
to move the heads.
to enable the setting.
.
to go back to the original screen, then
.
.
to select "CANCEL,"
Advertisement
Table of Contents
