When Memory Is Full - Ricoh AFICIO 1055 Operating Instructions Manual

Troubleshooting

When Memory Is Full

Document Server
Machine Status
The memory is full.
Connect Copy
Because Connect Copy scans in all your originals into memory, if the number of
originals exceeds a certain limit, the machine will run out of memory.
Limitation
❒ If memory is full on either the master unit or sub-unit, Interrupt Copy will not
5
be available.
Note
❒ If you set "Memory Full Auto Scan Restart"of the User Tools to "Yes", the
memory overflow message will not be displayed, but make Connect Copy for
the scanned original automatically. Connect Copy continues scanning and
copying until finishing the job. Note that copy sets will be printed out sepa-
rately by scanning at this time.
Machine Status
The memory is full.
The machine asks you whether you want to
scan the remaining originals.
262
Action
Delete any unnecessary files and then scan the
document again. See ⇒ p.222 "Deleting Saved
Documents".
Action
Press the [Output] key to copy scanned origi-
nals and clear the scanning data. Press the
[Clear] key to clear the scanning data and not
copy.
To continue copying, remove all copies then
press the [Resume] key. To stop copying, press
the [Cancel] key.