To Stop Scanning Temporarily - Ricoh AFICIO 1055 Operating Instructions Manual

When setting an original on the exposure glass or in the document feeder
using Batch (SADF) mode
Reference
⇒ p.38 "Batch (SADF) mode".
A Set the original, then press the { { { { Start} } } } key.
Note
❒ Start with the first page to be copied.
B Set the next original. When it is placed on the exposure glass, press the
{ { { { Start} } } } key.
Note
❒ Set the original in the same direction as the first one.
C After all originals are scanned, press the { { { { #} } } } key.

To Stop Scanning Temporarily

When you are using the Sort, Stack, or Staple function, the originals are scanned
into memory.
A A A A
Press the { { { { Clear/Stop} } } } key to stop originals from being scanned into memo-
ry.
To resume scanning
A Press the [Resume] key to resume scanning.
Note
❒ Scanned images in memory are not cleared.
To clear scanned images of the originals
A Press the [Cancel] key.
Scanning is stopped with the images cleared.
Sort/Stack/Staple
2
65