Stack - Ricoh AFICIO 1055 Operating Instructions Manual

When setting an original on the exposure glass or in the document feeder
using Batch (SADF) mode
Reference
⇒ p.38 "Batch (SADF) mode".
A Set the original, then press the { { { { Start} } } } key.
Note
❒ Start with the first page to be copied.
B Set the next original. When it is placed on the exposure glass, press the
{ { { { Start} } } } key.
Note
❒ Set the original in the same direction as the first one.
C After all originals are scanned, press the { { { { #} } } } key.

Stack

The optional finisher is required to use this function.
❖ ❖ ❖ ❖ Stack
This function groups copies of each page in a multi-page original together.
Every other page stack is shifted for ease of separation. The finisher shift tray
of the finisher provides this function by sliding from side to side.
3
2
1
Note
❒ The paper sizes that can be used in the Stack function are as follows:
Metric version
Inch version
Reference
For the maximum tray capacity of the optional finisher, see ⇒ p.323 "50-Sheet
Finisher (Option)" .
A3L, B4L, A4KL, B5KL, A5KL
11" × 17"L, 8 " × 14"L, 8
1
/
2
" × 11"KL
1
/
2
Sort/Stack/Staple
2
59