If Your Machine Does Not Operate as You
Want
General
Machine Status
The machine instructs you to
wait.
The machine cannot detect the
original size.
The machine instructs you to
check the original direction.
The machine instructs you to
check paper size.
The machine cannot perform
rotate-sorting for this paper
size.
The machine cannot punch
this size of paper.
The number of sheets that can
be stapled has been exceeded.
5. Troubleshooting
Problem/Cause
The machine is warming up.
Copy paper is moving in Tray
1 (Tandem Tray).
Improper original is set. See ⇒
p.25 "Sizes difficult to detect".
Original is not set.
There is no copy paper that is
in the same direction as the
originals.
Improper original size is set.
The size of paper for which no
rotate-sorting is available is
selected.
--
--
Action
Wait for the machine to warm-
up.
Reference
You can use Auto Start
mode during warm-up pe-
riod. See ⇒ p.88 "Auto
Start".
Wait for the machine.
Set non-standard size original
on the exposure glass. See ⇒
p.34 "Setting Originals on the
Exposure Glass".
Select paper manually, not in
Auto Paper Select mode.
Do not use Auto Reduce/En-
large mode.
Set your originals.
Set the original in the same di-
rection as the copy paper.
Select the proper paper size.
Select the proper paper size.
See ⇒ p.56 "Sort".
Select the proper paper size
that can be used in Punch
mode. See ⇒ p.67 "Punch".
Check the stapler capacity.
See ⇒ p.61 "Staple".
249