Preset Reduce/Enlarge - Ricoh AFICIO 1055 Operating Instructions Manual

Copying

Preset Reduce/Enlarge

You can select a preset ratio for copying.
2
Note
❒ You can select one of 11 preset ratios (5 enlargement ratios, 6 reduction ra-
tios).
❒ Use "Shrink&Center" to reduce the image to 93% of its original size with the
center as reference. You can register this function in a shortcut key on the ini-
tial display.
❒ You can change the preset ratios to other ratios you frequently use. See "En-
large" in ⇒ p.297 "Reproduction Ratio
duction Ratio
❒ You can set and display three kinds of ratio on the initial display. See "Short-
cut R/E" in ⇒ p.297 "Reproduction Ratio
❒ You can specify which of [Reduce], [Enlarge] or [Input Ratio] is to be given pri-
ority and displayed when the [Reduce/Enlarge] key is pressed. See "R/E Prior-
ity" in ⇒ p.297 "Reproduction Ratio
❒ You can select a ratio regardless of the size of an original or copy paper. With
some ratios, parts of the image might not be copied or margins will appear on
copies.
❒ Copies can be reduced or enlarged as follows:
❖ ❖ ❖ ❖ Metric version
Ratio (%)
400 (enlarge area by 16)
200 (enlarge area by 4)
141 (enlarge area by 2)
122
115
93
92
2
/ ".
2
" and "Reduce" in ⇒ p.298 "Repro-
1
/
2
1
/ ".
2
1
/ ".
2
Original → → → → Copy paper size
--
A5→A3
A4→A3, A5→A4
F→A3, A4→B4
B4→A3
--