Ricoh AFICIO 1055 Operating Instructions Manual page 361

Menu
Auto Tray Switching
Auto Off Timer
Low Power Shift Time
Low Power Timer
Description
• If you select [Off].
When paper has run out, "BLoad paper on ***." will be dis-
played, and copying will be interrupted.
Note
❒ Default: On (Rotate)
❒ If you put recycled paper, translucent paper, user colour paper
1, or user colour paper 2 in paper trays and indicate them in the
"Paper Size Setting" menu, the Auto Tray Switching function
is available to these trays only when their paper types are iden-
tical.
Reference
See "Special Paper Indication" in ⇒ p.17 "Paper Size Setting".
The machine turns itself off automatically to conserve energy after
a specified amount of time has passed following job completion.
This function is called "Auto Off".
The machine status after the Auto Off operation is called " Off
mode"or "Sleep mode". For the Auto Off Timer, specify the time
to elapse before the Auto Off function is activated.
The time can be set from 1 to 240 minutes.
Note
❒ Default: 90min.
❒ Auto Off might not be effective when an error message is dis-
played.
❒ To return to the ready condition from Auto Off, the machine re-
quires the same warm-up time as the time for becoming ready
after its power is turned on.
The machine enters Low Power mode automatically after your job
is finished, after the selected time. The time can be set from 1 to 240
minutes.
Note
❒ Default: 15min.
The machine enters to Energy Saver mode automatically after
your job is finished, after the selected time. The time can be set
from 10 to 999 seconds, or 0.
Note
❒ Default: 60sec.
❒ When the time is set to "0", Energy Saver mode will not be ac-
tivated.
Settings You Can Change with the User Tools
1
13