Basic - Ricoh AFICIO 1055 Operating Instructions Manual

User Tools (System Settings)
Menu
ADF Orig. Ejection
1
<F/F4>Size Setting
Basic Page 2
Menu
System Reset
Function Priority
Copy/Document Server:
Output Tray
14
Description
As a default setting, the scanned originals from the document
feeder are ejected to the ADF external tray. If there is no space to
attach an ADF external tray, you can change the output tray to the
ADF tray. However, if the output tray is set to the ADF tray, it
takes a little more time than to the ADF external tray.
Note
❒ Default: ADF Ext. Tray
❒ Even if the ADF external tray is set, papers are ejected to the
ADF tray in 2 Sided → 2 Sided copy mode.
Currently three types of F size are available; 8
and 8" × 13".
The document feeder or platen cover sensor cannot distinguish
these 3 types of originals.
This function sets the F size from the document feeder or platen
cover sensor.
Auto Paper Select or Auto Reduce/Enlarge can be used for F size
originals based on this setting.
Note
❒ Default: 8 " × 13" L
1
/
2
Description
If no operation is performed for a selected time after interrupt cop-
ying, the interrupt copying will be canceled. This function is called
"System Reset". The time can be set from 10 to 999 seconds, or 0.
Note
❒ Default: 60sec.
❒ When the time is set to "0", System Reset will not be activated.
You can specify the mode that is displayed when the operation
switch is turned on or System Reset is activated.
Note
❒ Default: Copy
You can specify a tray to which documents are delivered.
Note
❒ You can select from "Copy tray", "Finisher Shift Tray", "Fin-
isher Proof Tray".
❒ Without the optional finisher installed, "Copy tray" is the only
output tray that can be used.
" × 13", 8 " × 13"
1 1
/ /
2 4