Ricoh AFICIO 1055 Operating Instructions Manual page 302

User Tools (Copy/Document Server Features)
Menu
Photo
Pale
Generation
6
Original Image Density
Level
Enhance Density Setting
Auto Reset Timer
294
Description
For a photo original, adjust the finish quality level to match the
type of photo original.
Note
❒ Default: Screened Printed
❒ [SP Mode Changed] is the value set during service setup.
❒ Select [Screened Printed] for printed photo originals, and [Con-
tinuous Tone] for printed photo originals with fine dots.
❒ Select [Normal] for printed photo and text originals.
Adjust the quality level for the finish of a pale original with nor-
mal density.
Note
❒ Default: Normal
❒ [SP Mode Changed] is the value set during service setup.
Adjust the quality level so as not to thicken the lines of the finish
image.
Note
❒ Default: Normal
❒ [SP Mode Changed] is the value set during service setup.
You can select one of seven original image density levels for each
of the original types (Text, Text·Photo, Photo, Pale, Generation).
Note
❒ Default: Normal
You can change the density level depending on the original type.
Note
❒ Select [High] if your originals frequently contains large areas of
black.
❒ This setting can be stored in a shortcut key.
The machine returns to its initial condition automatically after
your job is finished. The time can be set from 10 to 999 seconds, or
0.
Note
❒ Default: 60sec.
❒ To turn "Auto Reset Timer" off, input "0".
❒ Note that when "Auto Reset Timer" is turned off, the machine
will not return to the user code input window automatically.