Selecting Original Type Setting - Ricoh AFICIO 1055 Operating Instructions Manual

Copying
Combined Auto and Manual Image Density
A Make sure that the [Auto Image Density] key is selected.
B Press the [Lighter] or [Darker] key to adjust the density.
2
Note
❒ If you do not wish to set any other functions, press the { { { { Start} } } } key to
start copying.

Selecting Original Type Setting

Select one of the following types to match your originals:
❖ ❖ ❖ ❖ Text
Select this mode when your originals contain only text (no pictures).
❖ ❖ ❖ ❖ Text·Photo
Select Text·Photo when your originals contain photographs or pictures with
text.
❖ ❖ ❖ ❖ Photo
Delicate tones of photographs and pictures can be reproduced with this
mode.
❖ ❖ ❖ ❖ Pale
Select this mode for originals that have lighter lines written in pencil, or for
faint copied slips. The faint lines will be clearly copied.
❖ ❖ ❖ ❖ Generation Copy
If your originals are copies (generation copies), the copy image can be repro-
duced sharply and clearly.
Note
❒ You can directly display the [Original Mode] key on the copy original display.
See "Original Mode Display" in ⇒ p.292 "General Features
❒ You can adjust the quality level for each original type. See "Original Mode
Quality Level" in ⇒ p.292 "General Features
❒ In Connect Copy mode, make adjustments to the original type on the master
unit.
44
1
/ ".
3
1
/ ".
3