Placing Originals In The Adf - Ricoh IM 2702 User Manual

• When loading an original written by pencil on the ADF, the original may be dirty from by being
scraped.
• Correct an original that tends to curl before setting on the machine.
• Take care so that multiple originals do not stick to each other and are not fed at once.
• Do not set an original that is wet with correcting fluid or ink. The scanning glass will be stained and
the stain will be scanned with the original.

Placing Originals in the ADF

• Do not block the sensors with your hand. Be sure to load the originals neatly and do not push them
into the ADF forcibly. It may cause paper misfeeds or paper size error.
1. Adjust the original guide to the original size.
2. Place the aligned originals squarely face up in the ADF.
Place the originals with the first page facing up.
Fan sheets before loading so that multiple papers do not stick to each other and are not fed at
once.
Placing an Original in the Auto Document Feeder (ADF)
EBW106
DZW107
47