Establishing Communications; Figure 18 Sct Hardware Components; Section 6 Configuration - Honeywell SMV 3000 User Manual

Smart multivariable transmitter
Hide thumbs Also See for SMV 3000:
Table of Contents

Advertisement

5.2

Establishing Communications

Off-line Versus On-
line SMV
Configuration
Off-line Configuration
Procedures
SCT Hardware
Connections
Figure 18
SCT Hardware Components
Commerically-available
Laptop or Desktop PC
SMARTLINE OPTION MODULE
38
The SCT 3000 allows you to perform both off-line and on-line
configuration of SMV transmitters.
Off-line configuration does not require connection to the transmitter.
By operating the SCT 3000 in the off-line mode, you can configure
database files of an unlimited number of transmitters prior to receipt,
save them either to hard disk or a floppy diskette, and then download
the database files to the transmitters during commissioning.
An on-line session requires that the SCT is connected to the transmitter
and allows you to download previously-configured database files at
any time during installation or commissioning of your field
application. Note that you can also upload a transmitter's existing
configuration and then make changes directly to that database.
Refer to the SCT User Manual (on-line) for detailed procedures on how to
off-line configure SMV transmitters using the SCT 3000.
A PC or laptop computer (host computer) which contains the SCT
software program, is connected to the wiring terminals of the SMV
transmitter and other smart field devices. Figure 18 shows the hardware
components of the SCT.
SCT Software Program running
on Windows 95, Windows 98 or
Windows NT Operating System
PC Card
Line Interface
Module
SMV 3000 Transmitter User's Manual
Power
Supply
250
SMV 3000
Continued on next page
23057
1/99

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents