AccuPoint™ II precautions
Under certain conditions the on-screen pointer may travel contrary to
AccuPoint™ II operation. For example, if
You touch the AccuPoint™ II during power-up.
You apply constant, soft pressure to the AccuPoint™ II.
There is a sudden temperature change.
Strong stress is applied to the AccuPoint™ II.
If such travelling occurs, it is not a malfunction. Wait a moment for the
pointer to stop, then continue operation.
Replacing the cap
The AccuPoint™ II cap is an expendable item that can be purchased from
your computer dealer. It should be replaced after prolonged use.
To remove the AccuPoint™ II cap, firmly grasp the cap and pull it
1.
straight up.
ACCUPOINT II CAP
Position a new cap on the peg and press it into place.
2.
The peg is square, so be careful to align the cap's square hole with the peg.
4-2 Operating Basics
PEG
Removing the AccuPoint™ II cap
User's Manual