Table of Contents
Advertisement
TOSHIBA Brightness
Sensor Control
Options
You can add a number of options to make your computer even more powerful
and convenient to use. The following options are available:
Memory expansion
Battery pack
AC adaptor
Battery charger
Security lock
USB FDD Kit
Advanced Port
Replicator II
Hard disk drive
The brightness of LCD is automatically controlled by
Brightness Sensor. However, you can compensate the
brightness using TOSHIBA Brightness Sensor Control. In
order to use TOSHIBA Brightness Sensor Control, you have
to set Brightness Sensor in TOSHIBA Power Saver to ON.
A 128, 256, 512 or 1,024 MB memory module (PC2100 DDR)
can easily be installed in the computer.
An additional battery pack can be purchased from your
TOSHIBA dealer. Use it as a spare or replacement.
If you use your computer at more than one site frequently,
it may be convenient to purchase an additional AC adaptor
for each site so you will not have to carry the adaptor with
you.
The battery charger lets you charge extra batteries outside
the computer.
A slot is available to attach a security cable to the com-
puter to deter theft.
A 3 1/2" diskette drive accommodates 1.44-megabyte or
720-kilobyte diskette. It connects to a USB port. (You
cannot format 720-kilobyte diskettes on Windows XP, but
you can use previously formatted disks.)
The Advanced Port Replicator II provides the ports
available on the computer in addition to separate PS/2
mouse and PS/2 keyboard ports, a digital visual interface
(DVI) port, line-in jack and line-out jack.
You can increase your computer's data storage capacity
with additional hard disk drives. They are available in the
following sizes:
• 30 billion bytes (27.94 GB)
• 40 billion bytes (37.26 GB)
• 60 billion bytes (55.88 GB)
Get other manuals https://www.bkmanuals.com
Options
1-13
Advertisement
Table of Contents
