Table of Contents
Advertisement
User's Manual
Installing the HDD pack
To install the hard disk drive, follow the steps below.
1. Place the HDD into the space for HDD. Slide the HDD to connect to the
connector.
2. Fold over the plastic tab so that it goes into the HDD space. Press the HDD to
ensure a firm connection.
3. Seat the cover and press down until the latches click into place.
4. Secure the cover with a screw.
Additional battery pack
You can increase the portability of the computer with additional battery packs. If
you're away from an AC power source and your battery runs low, you can replace it
with a freshly charged battery. See Chapter 6,
Slim Select Bay 2nd battery pack
You can insert a secondary battery pack in the computer's Slim Select Bay. The
battery comes with an adaptor. For details on using the adaptor, follow the steps
below. For details on inserting modules in the Slim Select Bay, refer to Chapter 4,
Operating
Basics.
8-16
Figure 8-18 Installing the HDD pack
Get other manuals https://www.bkmanuals.com
Power and Power-Up
Modes.
Advertisement
Table of Contents
