Basic Operation Of A Matrix Switcher; Feature Of The System 500 Matrix Switcher; Detailed Product Description And Selection; Installation And System Connections - Panasonic WJ-SX550A Operating Instructions Manual

The purpose of this manual is to provide step-by-step instructions for setting up and operating a Matrix System 500. If Matrix
Switchers are new to you, it is highly recommended that you read this manual in its entirety. If you are already familiar with Matrix
Switchers you might want to skip over Section 1, Basic Operation of a Matrix Switcher, and go directly to Section 4, Installation and
System Connections. Each section of this manual is briefly described below.
Section 1.

Basic Operation of a Matrix Switcher

This section covers the basics of crosspoint switching, spot and sequencing, microprocessor control of switch-
ing and camera accessory control.
Section 2. Features of the System 500 Matrix Switcher
The main features of the System 500 are described. Numerous illustrations are included that help to simplify the
explanations. A thorough understanding of key features is very important for proper setup of the system.
Section 3.

Detailed Product Description and Selection

Operating controls and their functions are explain in this section. Also, in-depth information about each board is
given here, along with details about proper board setup. A table is included here that specifies how many
optional boards are required for every possible system expansion.
Section 4.

Installation and System Connections

Information about cable connections between the Matrix Switcher and System Controllers, cameras, monitors
and peripheral devices is provided here.
Section 5.

Software Setup

Step-by-step procedures for successful first time programming of the system are explained in this section.
Graphical representations of the various setup tables are also provided. This section is very important as proper
programming of the system is vital for customizing the system to the end user's requirements.
Section 6. Operating Procedures
After system programming, normal operation of the system on a daily basis is done by following the steps out-
lined in this section.
Section 7. Troubleshooting
Most of the problems in a Matrix System can be traced to faulty hardware or software setup. This section is
invaluable as an aid in identifying the sources of common problems. Reading this section before requesting ser-
vice will save you time in resolving those problems.
Section 8. Specifications
Section 9. Index
HOW TO USE THIS MANUAL
-2-