Alarm Recall; Alarm History Table - Panasonic WJ-SX150 Series Addendum

■ Alarm History Table

There are 100 alarm records stored in chronological order
in 10 pages of tables.
1. Select the desired monitor. (Refer to p. 3 Monitor
Selection.)
2. Press the ALM RECALL button. "Alarm Recall" will
appear on the LCD. The ALARM HISTORY table will
appear on the active monitor as shown in the figure.

Alarm Recall

ALARM HISTORY
NO YYYY/MM/DD HH:MM:SS
016 2002/08/21 18:59:08
015 2002/08/21 18:58:08
014 2002/08/21 18:57:08
013 2002/08/21 18:55:08
012 2002/08/21 18:54:08
011 2002/08/21 18:53:08
010 2002/08/21 18:53:00
009 2002/08/21 18:52:08
008 2002/08/21 18:51:08
007 2002/08/21 18:50:08
The columns in the table indicate the status as follows:
DATE: Lists the date and time when the alarm status
changes.
ALARM: Lists the alarm number (01 - 99).
EVENT: Lists the event when the alarm status
changes.
3. Press the + button to select the next page of the history,
and press the – button to back up to the previous page.
4. To exit the mode, press the MON (ESC) or ALM
RECALL button.
1 of 2
ALARM EVENT
80 ALARM
80 ACK
80 RESET
07 ALARM
07 ACK
07 RESET
09 ALARM
09 RESET
06 ALARM
06 ACK
■ Video Loss History Table
There are 100 video loss detection records stored in
chronological order in 10 pages of table.
1. Select the desired monitor. (Refer to p. 3 Monitor
Selection.)
2. Press the MENU button repeatedly until "VLD History"
appears on the LCD.
VLD History
On Off
3. Press the F1 button.
The VIDEO LOSS HISTORY table will appear on the
active monitor as shown in the figure.
VIDEO LOSS HISTORY
NO YYYY/MM/DD HH:MM:SS
012 2002/08/21 18:59:08
011 2002/08/21 18:58:08
010 2002/08/21 18:57:08
009 2002/08/21 18:55:08
008 2002/08/21 18:54:08
007 2002/08/21 18:53:08
006 2002/08/21 18:53:00
005 2002/08/21 18:52:08
004 2002/08/21 18:51:08
003 2002/08/21 18:50:08
The columns in the table indicate the status as follows:
DATE: Lists the date and time when the video loss
status changes.
CH: Lists logical camera number, slave unit num-
ber or recorder number that is connected to
the system.
EVENT: Lists the event when the video loss status
changes.
4. To exit the mode, press the F2 button or MON (ESC)
button.
004
1 of 2
CH EVENT
99 VIDEO RECOVER
14 VIDEO RECOVER
99 VIDEO LOSS
07 VIDEO LOSS
R0 SW RECOVER
16 VIDEO LOSS
09 VIDEO LOSS
R0 SW LOSS
S1 SLAVE DOWN
S1 SLAVE RECOVER
13