Wj-Pb85X08 Camera Input Board - Panasonic System 850 Operating Instructions Manual

WJ-PB85X08 Camera Input Board

Preface
The WJ-PB85X08 Camera Input Board is an optional board for expanding the camera input capability of the System 850 Matrix
Switcher.
Appearance
q Camera Input Connector (CAMERA IN, 1 - 8)
These connectors accept either a color or B/W composite video signal from a camera.
In addition, the VD2 signal for synchronizing the vertical timing of the cameras, and data to
control camera site devices are multiplexed through this connector.
w Video Output Port (VIDEO OUT)
The video signal connected to the Camera Input Connector (CAMERA IN) is present at this
port.
The camera control data multiplexed on the video signal is not available at this port. When
the power of the Matrix Switcher Card cage is turned off, no signal is present at this port.
Connect between this output port and the VIDEO IN Port on the WJ-PB85C16 Crosspoint
Input Board of the Crosspoint Cage (MXSW) for switching camera input.
13
25
12
24
11
23
10
22
9
21
8
20
7
19
6
18
5
17
4
16
3
15
2
14
1
15
Pin No. Designation
25 CAMERA 1
24 CAMERA 2
23 CAMERA 3
22 CAMERA 4
21 CAMERA 5
20 CAMERA 6
19 CAMERA 7
18 CAMERA 8
17 Not used
16 Not used
15 Not used
14 Not used
Pin No. Designation
13 Ground
12 Ground
11 Ground
10 Ground
9 Ground
8 Ground
7 Ground
6 Ground
5 Ground
4 Ground
3 Ground
2 Ground
1 Ground
CAMERA
1
2
3
4
q
5
6
7
8
CAMERA IN
w
VIDEO OUT